Hunter Node + PGV-151 40mm Valve Bundle
This bundle combines a Hunter Node battery-operated controller with a Hunter PGV-151 (40mm) solenoid valve — everything you need to add a large-flow, battery-powered irrigation zone without mains power. Ideal for parks, sports fields, large garden beds, road medians, and agricultural applications where high flow capacity and remote installation are required.
The Node controller is programmed directly on the unit via its built-in LCD screen and buttons. No wiring to a central controller, no conduit, no electrician required. Plumb the valve into the line, connect the controller to the solenoid, and the system is ready to go.
Note: 9V batteries are not included. The Node controller requires one or two standard alkaline 9V batteries.
What’s Included
- Hunter Node Controller — single-station, battery-operated, LCD programmed, DC latching solenoid output
- Hunter PGV-151 40mm Valve — 50mm globe/angle body with flow control and BSP female thread inlet/outlet. Operated by the DC solenoid coil on the Node — no additional solenoid required
Node Controller — Specifications
| Feature | Detail |
|---|---|
| Stations | 1 station |
| Programs | 3 programs (A, B, C) — 4 start times each |
| Run Time | Up to 6 hours per station per program |
| Power Source | 1 or 2 × 9V alkaline batteries (not included) |
| Battery Life | Approximately 1–2 years (typical conditions) |
| Rain Delay | Up to 99 days manual suspend |
| Max Wire Run | Up to 30m (1mm² direct burial wire) |
| Waterproof Rating | IP68 — fully submersible to 3.5m |
| Warranty | 2 years |
PGV-151 Valve — Specifications
| Feature | Detail |
|---|---|
| Valve Size | 1 1/2″ (40mm) BSP female thread inlet & outlet |
| Valve Type | Globe/angle combination — installs in-line or at 90° |
| Pressure Range | 1.4–10.3 bar / 140–1030 kPa |
| Temperature Rating | Maximum 66°C |
| Solenoid | DC latching — operated by included Node controller |
| Warranty | 2 years |
Node Controller — Features
- Programmed via built-in LCD screen and buttons — no smartphone, app, or Wi-Fi required
- 3 programs (A, B, C) with 4 start times each
- Manual push-button start, stop, and rain delay on the controller
- Cycle & Soak — ideal for drip irrigation and seed germination
- Monthly and global seasonal adjustment
- Rain sensor compatible — Rain-Clik, Mini-Clik, Freeze-Clik, Wind-Clik (wired micro-switch type)
- Battery change reminders — set at 3, 6, 9, or 12-month intervals
- Battery life indicator on LCD display
- Secure passcode protection against unauthorised schedule changes
- Easy Retrieve™ Memory — saves full schedule, restores automatically after battery change
- IP68 rated — fully submersible to 3.5m
- Optional solar panel kit (SPNODE) available separately
PGV-151 Valve — Features
- 1 1/2″ (0mm) combination globe/angle body — installs in-line or at 90°
- Flow control adjustment — fine-tune flow and pressure per zone
- External and internal manual bleed for quick activation at the valve
- Double-beaded diaphragm seal for superior leak-free performance
- Captive bonnet bolts — no lost parts during servicing
- UV-resistant, corrosion-resistant high-grade PVC construction
- 100% water-tested at the factory before shipment
Genuine Hunter Industries products supplied through the official Australian distribution network. Authorised Hunter stockist with over 30 years in the irrigation industry.
