Hunter Node BT PGV-151 1 1/2″ Valve Bundle
This bundle combines a Hunter Node BT Bluetooth battery-operated controller with a Hunter PGV-151 1 1/2″ (40mm) solenoid valve — everything you need to add a large-flow, battery-powered irrigation zone controllable from your smartphone. Ideal for parks, sports fields, large garden beds, road medians, and agricultural applications where high flow capacity, remote installation, and the convenience of app-based programming are required.
The Node BT is programmed via the free Hunter BTT app (iOS and Android) over Bluetooth from up to 10 metres away — no need to crouch at the controller or carry a separate programmer. It can also be programmed directly on the unit via the built-in buttons if needed. No wiring to a central controller, no conduit, no electrician required.
Note: 9V batteries are not included. The Node BT controller requires one or two standard alkaline 9V batteries.
What’s Included
- Hunter Node BT Controller — single-station, battery-operated, Bluetooth 5.0, DC latching solenoid output. Programmable via free Hunter BTT app or directly on the unit
- Hunter PGV-151 1 1/2″ Valve — 40mm globe/angle body with flow control and BSP female thread inlet/outlet. Operated by the DC solenoid coil on the Node BT — no additional solenoid required
Node BT Controller — Specifications
| Feature | Detail |
|---|---|
| Stations | 1 station |
| Programs | 3 programs (A, B, C) — 4 start times each |
| Run Time | Up to 6 hours per station per program |
| Bluetooth | Bluetooth 5.0 — up to 10m range |
| App | Free Hunter BTT app — iOS 10.0+ / Android 5.0+ |
| Power Source | 1 or 2 × 9V alkaline batteries (not included) |
| Battery Life | Approximately 1–2 years (typical conditions) |
| Rain Delay | Up to 99 days manual suspend |
| Max Wire Run | Up to 30m (1mm² direct burial wire) |
| Waterproof Rating | IP68 — fully submersible to 3.5m |
| Warranty | 2 years |
PGV-201 Valve — Specifications
| Feature | Detail |
|---|---|
| Valve Size | 1 1/2″ (40mm) BSP female thread inlet & outlet |
| Valve Type | Globe/angle combination — installs in-line or at 90° |
| Pressure Range | 1.4–10.3 bar / 140–1030 kPa |
| Temperature Rating | Maximum 66°C |
| Solenoid | DC latching — operated by included Node BT controller |
| Warranty | 2 years |
Node BT Controller — Features
- Bluetooth 5.0 — program and monitor from up to 10 metres away via free Hunter BTT app
- Free Hunter BTT app available for iOS 10.0+ and Android 5.0+
- Can also be programmed directly on the unit via built-in buttons — no smartphone required
- 3 programs (A, B, C) with 4 start times each
- Manual push-button start, stop, and rain delay on the controller
- Cycle & Soak — ideal for drip irrigation and seed germination
- Monthly and global seasonal adjustment
- Rain sensor compatible — Rain-Clik, Mini-Clik, Freeze-Clik, Wind-Clik (wired micro-switch type)
- Battery change reminders — set at 3, 6, 9, or 12-month intervals
- Battery life indicator on LCD display and in app
- Secure passcode protection against unauthorised schedule changes
- Easy Retrieve™ Memory — saves full schedule, restores automatically after battery change
- IP68 rated — fully submersible to 3.5m
- Optional solar panel kit (SPNODE) available separately
PGV-151 Valve — Features
- 1 1/2″ (40mm) combination globe/angle body — installs in-line or at 90°
- Flow control adjustment — fine-tune flow and pressure per zone
- External and internal manual bleed for quick activation at the valve
- Double-beaded diaphragm seal for superior leak-free performance
- Captive bonnet bolts — no lost parts during servicing
- UV-resistant, corrosion-resistant high-grade PVC construction
- 100% water-tested at the factory before shipment
Genuine Hunter Industries products supplied through the official Australian distribution network. Authorised Hunter stockist with over 30 years in the irrigation industry.
